Fixed flatbed with crane

FIXED FLAT BED - SMALL

We can now offer the market flatbeds with a crane for haulage trucks. The beds are designed and manufactured in Sweden, adapted to our Nordic climate and for demanding tasks, while great focus is placed on user-friendliness and safety. By conducting the development and production of the flatbed ourselves, we can offer our customers cost-effective solutions with short construction times.

The bed has a standardised layout to meet the demands and challenges that haulage industry users are faced with on a daily basis. In this way, they can easily perform safe and economical transports. The bed also has a low build height and low tare weight for optimum economy and minimum environmental impact. In order for users to be able to carry out the work as safely as possible, the fixed bed has been designed with excellent load lashing possibilities, with approximately 120 selected load securing points in the standard version, and are thus adapted to meet  European standards EN12640, among others.

Quick facts

  • In order to enclose the load in the best possible way, the bed is equipped with holes for freight supports distributed in coordinates over the entire bed surface.
  • The freight supports are stored in the front wall to be easily and ergonomically available when required.
  • In order for users to be able to carry out the work as safely as possible, the fixed bed has been designed with excellent load lashing possibilities. Supplied with approximately 120 carefully selected load lashing points in the standard version.
  • Excellent lashing properties also minimise the number of tensioner straps and work steps.
  • Ergonomic working position thanks to low bed height
  • Ladder for easy and ergonomic use of the loading area on the bed
  • Designed for best possible safety, in accordance with European standards: EN 12642, EN 12640, EN 12999.
  • For optimum driver ergonomics the flap system is made of aluminium.
  • The bed is also light weight for optimum economy and minimum environmental impact.
  • For best possible service-life the bed is hot-dip galvanized as standard.
  • Bed door facilitates work with the bed

Technical data

  • External dimensions: Length 6625mm
  • Subframe: For crane mounting
  • Bed base: 35mm, wear protection plywood
  • Anchorage: Rails between the edge profiles of the open profile
  • Flaps: Height 800mm in naturally anodised aluminium planking
  • Door: 2 x installed on right and left sides. Width: 800mm
  • Stake holder: 6 x stakes, length: 2400mm horizontally in front wall
  • Front wall: Height: 1530 mm
  • Surface treatment: Hot-dip galvanized construction

Features

Freight support storage

Easy storage of freight supports integrated in the front wall to always be at hand without taking up space on the load area of the bed.

Lashing system

Versatile and unique lashing system that minimises the number of tensioner straps and work steps.

Low build height bed

Low build height bed and low tare weight for best possible ergonomics and payload.

Hot-dip galvanized construction

High quality through hot-dip galvanized construction of high strength steel.